The XMTA series digital display adjuster adopts international standard size 96×96×110mm, compared to general TE series simulation type meter, it owns merits of high precision, strong shock resistance ability,good reliability, simple installation, clear reading,no parallax and long distance observation support etc and on adjusting mode, it has two digits, three digits, time proportion type,silicon controlled concessive adjusting function. It is widely used for temperature measure and autocontrol of different industries such as textile,plastic machinery,oven and so on, and also can be used for parameters display and control of pressure, flux and liquid level when equipped to sensor.

Input signal: Thermocouple, thermoresistance, voltage, current. Resistance
Regulater style: Two digits adjusting,
Three digits adjusting
Time proportion adjusting
Silicon controlled phase-shifting
Silicon controlled zero crosss
Silicon controlled three phases zero cross
PID adjusting Appearance packing size: Appearance 160mm× 80mm packing 152mm× 76mm
Accuracy: Dispaly 1.0class control± 1º C
Operation condition: Temperature 0~50º C comparative moist≤ 85%
Output contact capacity: Relay contact 5A 250v AC, no contact voltage DC 12V for SSR driver
Proporational cycle: Relay 30sec no-contact 2sec
Consumed power: ≤ 5w
Temperature range: Thermocouple 0~1800º C thermoresistance-200~600º C